Omniguard Manual Downloads
Omniguard 4 Software Downloads
Downloading Software
- Click on the link for the file you want to download.
- When your browser asks, choose "Save this file to disk" and click "OK".
- Change the "Save As" location to the Desktop and click on "Save".
- When the download is complete locate the file on your Desktop.
- If you've downloaded a "zip" file, double click on it or use a zip utility to open it and run the "install.exe" program it contains. Files with the ".exe" extension can be run by double clicking on them.
Complete Omniguard 4 Updater
Below is the complete Omniguard 4 Updater software installer which includes the latest firmware and all necessary support files including USB drivers.
|
Download Omniguard 4 Updater V6.12
- OG4UP_6_12.ZIP
(approx. 5.4M) 6/14/05 You must download the file to your computer before you can install the software. |
Note: You will need the USB cable that came with your Omniguard 4 to update the firmware.
Omniguard 4 Firmware Only
If you've already downloaded a previous version of the complete Omniguard 4 Updater above, you can download the latest firmware below and install it in your Omniguard using the same program. Click on the file below and save it in the same location where you've installed the Omniguard 4 Updater program (the default location is C:\Program Files\Omniguard 4 Updater). Unzip the file and then run Omniguard 4 Updater. The version of the file you've downloaded should appear in the program window.
|
Download Omniguard 4 Firmware V6.12 - OG4_6_12.ZIP (approx. 141k)
6/14/05 You must download the file to your computer before you can install the software. |
Omniguard Communication Complete Installers
Below is the complete Omniguard Communication software installer which includes all necessary support files including USB drivers. This software supports the Omniguard III and Omniguard 4.
|
Download Omniguard Communication V3.2.1 - OG3_2_1.ZIP (approx.
6.5M) 10/26/05 You must download the file to your computer before you can install the software. |
Note: You will need an Omniguard serial cable or USB Adapter for the Omniguard 3. For the Omniguard 4 you must have the provided USB cable in order to make use of this software.
Omniguard Communication Updaters
Download the files below to upgrade to the latest version of Omniguard Communication software. You must have a previous version installed in order to upgrade.
|
Download Omniguard Communication V3.2.1 Update
- OG3_2_1updater.ZIP (approx. 1.9M) 10/26/05 You must download the file to your computer before you can install the software. Omniguard 4 and the Omniguard 4 logo are registered trademarks of Engineering Solutions, Inc. and are used with their permission. |